What Does Electrical Panel Replacement / Upgrade Cost?
Real price ranges for a panel replacement or upgrade – what pushes a quote toward the high end, what the number already covers, and what it does not.
What’s Covered on This Page
- What Does Electrical Panel Replacement / Upgrade Cost in the Dallas-Fort Worth Area?
- What Makes Your Price Land at the Low End or High End?
- What’s Included in the Price – and What’s Not?
- What Does the Most Common Panel Upgrade Cost?
- Is There a Service Call Fee, and Can I Finance the Upgrade?
- Can I get a price without having someone come out?
- Who pulls the permit, and can the permit fee change my price?
- Can the price change once you open the panel up?
- My homeowners insurance says the panel has to go. Does that change what I pay?
- I’m adding an EV charger and a hot tub circuit. Should those wait until after the panel is done?
- Related Links
What Does Electrical Panel Replacement / Upgrade Cost in the Dallas-Fort Worth Area?
Most homeowners we quote for a panel replacement or upgrade land somewhere between $1,500 and $4,500. The job we do most often is a straight 200A upgrade on an older or undersized panel. That one runs $2,100 to $3,300 for most homes in Sunnyvale, Mesquite, Forney, and the rest of the DFW area we cover. We give you that number in writing before anyone touches your panel. And it’s flat-rate, not an hourly guess.
A few things push the price around inside that range. Panel amperage matters. A bump to 200A costs less than going bigger for a home with an EV charger or a shop. Brand plays a part too. So does the condition of your meter and existing service. Grounding upgrades, how many circuits you’re running, how easy the panel is to get to, and whether Oncor needs to coordinate on the service drop all factor in. Some jobs also need code upgrades or permit work, which we account for in the quote, not tack on after.
- Panel amperage and brand
- Meter and service condition
- Grounding upgrades needed
- Number of circuits
- Access to the panel
- Utility coordination with Oncor
- Code upgrades and permits
What’s included in that price? The panel and materials, professional installation, new breakers, grounding, startup and testing, and hauling away your old panel. What’s not included: service-entrance or meter work that belongs to the utility, full home rewiring, code corrections beyond the panel itself, and permits unless we’ve already built them into your quote. If your project touches any of those, we’ll walk you through it and put the added cost in writing before we start, same as everything else on our electrical panel replacement service.
There’s a $26 to $99 service-call fee to get a technician out for the diagnostic visit. We credit that fee toward the job if you have us do the work. Financing is available on qualifying installations for homeowners who’d rather spread the cost out, subject to approved credit.
What Makes Your Price Land at the Low End or High End?
Most panel upgrades in Sunnyvale and the surrounding DFW towns land close to our typical job: a 200A panel swap with new breakers and proper grounding. That’s usually priced between $2,100 and $3,300. Where your job falls in that range comes down to what’s already behind your wall.
A straightforward job pushes you toward the low end. This means you already have a 200A panel or something close, easy access, and a panel brand we can get without a special order. If your meter and service entrance are in decent shape, that helps too. Fewer circuits to reconnect and no grounding rebuild also keep labor time down. Less labor time means less cost on a flat-rate job.
A handful of things move you toward the high end. Older homes east of Dallas (especially those built before the 1980s) sometimes have undersized 100A service, aluminum branch wiring, or grounding that doesn’t meet current code. Bringing all of that up to standard adds real time and material. A cramped attic panel or one buried behind finished walls costs more in labor just to get to safely. If your meter can or service drop needs coordination with Oncor before we can pull the old panel, that adds a step we don’t control. Circuit count matters too. A panel feeding a shop, a pool, or a big addition has more wires to land than a standard three-bedroom home.
Permits and code corrections are the other swing factor. Our pricing includes the panel, materials, professional installation, breakers, grounding, startup testing, and hauling off your old panel. It doesn’t include service-entrance or meter work handled by the utility, full home rewiring, separate code corrections, or permit fees unless we’ve spelled those out for your specific job. If your inspection turns up a grounding or bonding issue that predates the panel itself, that’s a real cost driver we’ll flag before we touch anything. That’s not something we fold in quietly.
We’ve done panel upgrades on 1970s slab homes in Sunnyvale with tight attic access and on newer builds in Forney where everything lines up clean. The price difference between those two jobs is almost always access and grounding, not the panel itself. You can read more about how we scope this work on our electrical panel replacement page before you call.
If you want a number specific to your panel, brand, and access, a technician can look at it in person. We give you the flat-rate price in writing before anything starts. Call 972-288-2263 and talk to a real person about scheduling that visit.
What’s Included in the Price – and What’s Not?
When we quote an electrical panel replacement, the price covers the whole job we control from your service panel forward. That means a new panel and materials. It includes the labor to install it, new breakers sized for your circuits, and proper grounding. We also do startup and testing once it’s live, then haul away your old panel. You won’t be stuck finding a place for a 40-pound box of dead copper.
What it doesn’t cover is anything upstream of the panel or outside the panel itself. Work on the service entrance or the meter belongs to Oncor Electric Delivery, not us. We can’t quote or perform that piece. Rewiring your home, correcting code issues found elsewhere in the house, and permit fees aren’t baked into the panel number either. We’ll spell them out on your quote in writing if they apply.
A few things push the price around inside that $2,100 to $3,300 typical range for a standard 200A upgrade. Panel amperage and brand matter. A bigger service or a specific manufacturer costs more than a basic swap. The condition of your meter and service equipment plays in too. Also, consider how many circuits you’re running, whether grounding needs upgrading to current code, and how easy the panel is to reach. A panel tucked behind a water heater in a tight utility closet takes longer than one mounted on an open garage wall, for example.
Utility coordination and code upgrades can add time and cost. If Oncor needs to disconnect and reconnect service, that’s scheduled around their timeline, not ours, and it’s worth asking about upfront. Permits are typically required for a panel swap in Sunnyvale and the surrounding towns we work in. We handle that process as part of the job when it’s included in your quote.
If you’re not sure whether a full panel swap is even the right move yet, our electrical panel replacement and upgrade page walks through the signs that usually point to it.
We charge a $26 to $99 service-call fee to come look at your panel and give you a firm number. If you move forward with the replacement, we apply that fee to the job cost. The visit itself doesn’t end up as money you spent for nothing.
Financing is available on qualifying panel upgrades and larger installs. You can spread the cost out instead of paying it all at once.
Have questions? We’re happy to help.
Call Today, Get Service Today. Xtreme Air Services is ready to help.
What Does the Most Common Panel Upgrade Cost?
Panel replacement runs $1,500 to $4,500 depending on the job. The one we do most often is a straight 200A upgrade for a home that’s outgrown its old panel. That typically lands between $2,100 and $3,300. This includes new breakers, proper grounding, and everything tested and inspected before we call it done.
That price covers the panel and materials. It includes the install labor, new breakers, grounding, startup testing, and hauling off your old panel. It doesn’t cover service-entrance or meter work. That belongs to Oncor. And it doesn’t cover rewiring or code corrections we find once we’re inside your panel. If code work comes up, we’ll price that separately before touching it, not after.
A few things move the number inside that range. The panel’s amperage matters, for example. A 100A to 200A jump costs more than a straight swap at the same capacity. Brand and circuit count play in too; more breakers means more labor. Grounding upgrades on older homes, especially anything built before modern grounding code, add time. And access matters more than people expect – a panel in a tight garage corner or a cramped attic run in a Sunnyvale ranch home takes longer than one with a clear wall.
Utility coordination is its own variable. Oncor has to disconnect and reconnect service for most panel swaps. That scheduling isn’t something we control on our end. Permits add a step too. Whether you’re on the Dallas County or Kaufman County side of Sunnyvale can change how that process runs.
If you call us out to look at your panel, the service-call fee is $26 to $99. We apply it to the job if you move forward with us. You’re not paying twice just to get a firm number in front of you. Financing is available on qualifying panel upgrades too. A bigger job doesn’t have to come out of pocket all at once.
Every price we quote for our electrical panel replacement and upgrade work is flat-rate and written down before anyone picks up a tool. No hourly meter, no guessing what the invoice will say at the end.
Is There a Service Call Fee, and Can I Finance the Upgrade?
Yes, there’s a service call fee, and financing is available. We charge $26 to $99 for the visit where we look at your panel and put together your quote. That fee gets credited toward the job if you decide to move forward with Xtreme Air Services. You won’t pay twice.
The price depends on when you call and how far you are from us. A weekday visit during regular hours runs toward the lower end. We don’t add extra charges for nights or weekends, so that part of the fee stays the same no matter when we show up.
If you don’t move forward after the visit, you’re only out the call fee itself. That’s the whole point of pricing it separately. You get a licensed technician at your house, a real look at your panel, and a written number. All before you owe us anything close to $2,100 or more.
On financing, we offer flexible options on qualifying installations and larger jobs. This is subject to approved credit. A panel upgrade in the $2,100 to $3,300 range – or higher with added circuits or grounding work – is exactly the kind of job financing tends to make sense for. It spreads the cost out. You won’t have to write one big check the same week your panel gets swapped.
We’ll talk through financing during the same visit where we give you the written quote. You won’t be left guessing about monthly numbers until later. Nobody’s required to finance. Plenty of people just pay the flat rate straight up. It’s there if it helps.
Frequently Asked Questions
Common questions about electrical panel replacement or upgrade
Can I get a price without having someone come out?
The instant quote at https://xtremeairservices.com/instant-quote/ will put you in the right range – panel replacement runs $1,500 to $4,500, and a standard 200A upgrade lands at $2,100 to $3,300. A firm number needs eyes on the equipment. Where your job falls depends on the existing service size, the condition of the meter base and mast, whether the panel sits inside or outside, and what your jurisdiction requires. That is what the $26 to $99 diagnostic visit buys, and it is credited toward the work if you go ahead.
Who pulls the permit, and can the permit fee change my price?
We pull it. Panel work is permitted and inspected everywhere we work, and the authority depends on your address – Kaufman County for Forney, Dallas County or your city for Mesquite, Garland, Rowlett, Seagoville and Balch Springs, the Town of Sunnyvale here at home. Oncor also has to schedule the disconnect and reconnect. The jurisdiction sets the permit fee, not us, so it shows on your written quote as its own line instead of being buried in labor. Ask for the install date when you sign – the inspector’s and Oncor’s calendars drive it.
Can the price change once you open the panel up?
Rarely, because the $26 to $99 diagnostic visit exists to prevent exactly that. A technician pulls the cover, checks the service entrance, the meter base, the grounding and the branch wiring, then writes a firm number. What moves a price afterward is something nobody could see first: a rusted meter can, aluminum branch conductors that need pigtailing, a mast that failed at the roof line, or an inspector calling for a new grounding electrode. Anything in that category gets priced and approved in writing before we do it. The number on your signed quote is what you pay.
My homeowners insurance says the panel has to go. Does that change what I pay?
Your carrier’s letter doesn’t move the number. A replacement driven by an insurance non-renewal still lands in the $1,500 to $4,500 range, and a standard 200A job still runs $2,100 to $3,300. What you should ask for is documentation. Get the requirement from your carrier in writing, and we’ll hand you an itemized invoice naming the old panel brand, the new panel and its amperage, plus the permit and the passed inspection record. That paperwork is usually what the underwriter actually wants before coverage gets reinstated.
I’m adding an EV charger and a hot tub circuit. Should those wait until after the panel is done?
Adding them during the panel job costs less than calling us back. The $2,100 to $3,300 covers the 200A service and the panel itself; each new circuit is a separate line on the same quote, priced by run length, wire size and how difficult the attic or drywall path is. One visit means one permit, one inspection and one service call instead of two rounds of each. Tell the technician about every load you’re planning at the diagnostic visit, including future ones, so the panel gets sized with breaker space to spare.
Ready to Get Started?
Call 972-288-2263 Today, Get Service Today.