Background Checked and Drug Tested

We make sure our employees at Xtreme Air Services pass background checks and drug tests. We only hire the best workers – then we train them to an even higher standard.

Licensed, Registered, Insured Workers

Each of our HVAC technicians is fully registered, licensed and carries general liability and workers compensation insurance. We’re certified refrigerant handlers too.

Contact Xtreme Air Services

What Does EV Charger Installation Really Cost?

Real price ranges for a Level 2 home charger – what amperage and conduit routing do to the number, and what the permit side adds.

⚑ Same-Day Service, 6 Days a Week
πŸ›‘ Licensed, Bonded & Insured
⭐ 4.8β˜… Across 2,900+ Reviews
βœ“ 100% Satisfaction Guarantee
Contractor explains EV charger installation wiring to homeowner in Sunnyvale garage

Need EV charger installation?

972-288-2263

Call Today, Get Service Today

What EV Charger Installation Costs

Quick Summary: A Level 2 home EV charger install typically runs $500 to $2,500. Most jobs finish between $900 and $1,700. This price covers a dedicated circuit, mounting, and testing. It doesn’t cover the charger itself if you’re supplying your own. A panel upgrade is also not included if your home needs one.

Most EV charger installs in Sunnyvale and around the DFW Metroplex land between $900 and $1,700. This means running a dedicated circuit from your electrical panel to a Level 2 charger. We mount it, connect it, and test it before we leave. Most homes finish in a single day.

The full range stretches from $500 up to $2,500. The distance really matters. A charger mounted a few feet from the panel costs less than one that needs 40 feet of conduit run through an attic or along an exterior wall.

  • How far the charger location is from your electrical panel
  • Whether your panel has room for the new circuit or needs an upgrade first
  • The amperage of the charger you’re installing
  • Whether we’re running conduit through walls, attic space, or outdoors
  • Any code corrections or permit requirements tied to your property

Older panels in a lot of the 1950s through 1990s slab homes around here are already close to full. If yours doesn’t have open capacity, that’s a real cost add. This happens before the charger install even starts, and we’ll tell you that up front.

Our quoted price includes the dedicated circuit, professional installation, mounting the charger, and startup and testing. It does not include the charger unit if you haven’t bought one yet. A panel upgrade is not included. Trenching, code corrections, or permits are also not included unless we’ve stated those separately in your quote.

If you call us out, the service-call fee runs $26 to $99. We credit that fee if you move forward with the installation. Financing is available on qualifying installations for larger jobs, subject to approved credit.

You can see the full breakdown on our EV charger installation page. This includes what a same-day appointment looks like from the first call to the final walkthrough.

Call now

What Drives Your Price Up or Down

Most EV charger installs land between $900 and $1,700. The final number comes down to a handful of things. We check these before we quote you a flat rate.

  • Distance from your electrical panel to the charger location. A garage right next to the panel costs less than a spot on the far side of the house.
  • Panel capacity. Older panels in many Sunnyvale and Mesquite homes (built in the 1960s through 1980s) sometimes need extra room made for a new dedicated circuit.
  • Charger amperage. A higher-amp Level 2 charger draws more power and can call for heavier wire and breaker sizing.
  • Wall and conduit routing. Running wire through brick, stucco, or a finished garage ceiling takes more labor than an open stud wall.
  • Code upgrades. If your panel or grounding doesn’t meet current code, that work gets priced separately from the charger install itself.
  • Permits. Sunnyvale sits on the Dallas County and Kaufman County line. Which side your property falls on can change which office pulls the permit.

Our price includes a dedicated circuit, professional installation, mounting, startup, and testing. It does not include the charger itself if you haven’t supplied one. Panel upgrades, trenching, code corrections, or permit fees are not included unless we’ve listed those separately in your quote. We’ll tell you before we start which of those apply to your home, not after.

If your panel is already tight on space or your home runs on older wiring, we’d rather walk you through the real options on our main service page than guess at a number over the phone.

There’s a service-call fee of $26 to $99 for the visit. We credit that fee if you move forward with us. Financing is available on qualifying installs if you’d rather spread out the cost.

Call now

What’s Included in Our EV Charger Installation Price

Most EV charger installs we do land between $900 and $1,700. The full range runs $500 to $2,500, depending on your setup. That price covers a Level 2 home charger installed on its own dedicated circuit. We run it from your panel, mount it on the wall, and test it before we leave. For most Sunnyvale and DFW homes, we finish the job in one visit.

Close-up of circuit breaker and copper wiring used in EV charger installation cost

Here’s what’s built into that number every time.

  • A dedicated circuit run from your electrical panel to the charger location
  • Professional installation by a licensed electrician
  • Mounting the charger securely on your wall
  • Startup and testing so the charger works before we leave

Here’s what that price doesn’t cover. If you haven’t bought a charger yet, the unit itself isn’t included in our labor number. A panel upgrade isn’t included either. Older homes on the Dallas County side of Sunnyvale sometimes need one if the existing panel doesn’t have room for a new 40 or 50 amp circuit. Trenching for a detached garage or a charger mounted away from the house isn’t included. Code corrections needed to bring older wiring up to current standard aren’t included. Permit fees also aren’t included unless we’ve quoted them up front.

A few things move the price inside that range. Distance from your panel to the charger matters a lot. A run of 10 feet costs less than one that has to snake through an attic or around a garage. Panel capacity plays in too. If Oncor’s service to your home and your panel can handle the added load, the job stays simple. If not, that’s a separate conversation about a panel upgrade before we talk chargers. Charger amperage, whether the wall or conduit routing is straightforward, and any permit or inspection requirement through the Town of Sunnyvale or Kaufman County all factor into where you land in that $500 to $2,500 window.

If you call us out and decide not to move forward with the install, you’re only on the hook for a $26 to $99 service-call fee. That fee gets credited if you do go ahead with our EV charger installation service.

Financing is available on qualifying installs and larger jobs, subject to approved credit. This can help if you’d rather spread the cost out instead of paying it all at once.

Call now

Not sure what your EV charger installation project needs? Ask us.

972-288-2263

Call Today, Get Service Today. Xtreme Air Services is ready to help.

The Most Common EV Charger Installation Job

Most calls we get for EV charger installation are for the same job. It’s a Level 2 home charger, mounted in the garage, run on its own dedicated circuit straight from the panel. We connect it, test it, and you’re charging the same day for most homes. That standard job runs $900 to $1,700. It sits inside our broader $500 to $2,500 range for EV charger work.

The number moves based on a few real factors. How far the charger sits from your panel matters a lot. More wire and conduit runs up the labor. Whether your panel has room for a new circuit without an upgrade is another big one. Plenty of homes east of Dallas still run older panels that need extra work before we can add a 240-volt circuit for a charger. The amperage of the charger itself and whether we’re running conduit through drywall or an exterior wall also factor in.

Here’s what’s included in that $900 to $1,700 range: the dedicated circuit, the mounting, the connection, and startup testing. You’ll know it’s working before we leave. Here’s what’s not included: the charger unit itself if you haven’t already got one, any panel upgrade your home might need, trenching if the run has to go underground, code corrections we find along the way, and permit fees where they apply.

We’ll also point out, plainly, that we don’t install a charger you sourced somewhere else without us verifying it. That’s part of standing behind the workmanship guarantee on what we put in your wall.

There’s a $26 to $99 service-call fee to get a technician out to look at your setup. That fee gets credited if you move forward with the install. If your situation needs more than the standard scope (like a panel upgrade or a longer conduit run), financing is available on qualifying installations so the bigger jobs don’t have to happen all at once.

If you want the full breakdown of what drives EV charger pricing up or down, our EV charger installation pricing guide walks through it in more detail.

Call now

Financing for EV Charger Installation

We offer financing on qualifying installations. A Level 2 charger install falls right in that range. Most jobs land between $900 and $1,700. Some push closer to $2,500 once a panel upgrade or extra wall routing gets added. Financing can turn a bigger upfront number into a monthly payment that’s easier to plan around.

Financing is on approved credit, so it’s not automatic for every homeowner or every job. We’ll tell you that plainly instead of promising terms we can’t guarantee. We can promise you’ll see your flat-rate written quote before any work starts. You’ll know the real total before you decide whether to pay outright or finance it.

Financing tends to matter most on the jobs where the panel needs work first. If your panel is older or already close to capacity, that upgrade adds real cost to the install. That’s usually when spreading the payment out makes sense. A straightforward install on a panel with room to spare is closer to the lower end of the range. Some homeowners just pay that one directly.

We walk you through the numbers during your quote, not after the work is done. Financing is a decision you make with the full price in hand. If you want to see how our process works from that first call through the finished install, that page walks through what happens before you ever commit to a price or a payment plan.

Call now

Frequently Asked Questions

Common questions about EV charger installation

How close will the final price be to the quote I’m given?

The number you sign is the number you pay unless the scope changes. A technician comes out for $26 to $99, looks at your panel, measures the conduit run to where the car actually parks, and writes a firm price before any work starts. That fee is credited toward the job if you go ahead. Prices move after that only when you ask for something different, like a second charger, a longer wall run, or an outdoor rated disconnect. For a ballpark before anyone visits, use https://xtremeairservices.com/instant-quote/.

Why does the permit show up as its own line on the quote?

Permit fees are set by whoever has jurisdiction over your address – the Town of Sunnyvale, Dallas County and Kaufman County each run their own schedule – so the amount isn’t ours to set. It shows as its own line rather than being buried in labor, which lets you see what the authority charges and what the work costs. If you’re comparing quotes, check whether the other one covers permitting at all; a lower number often isn’t once the fee and the inspection are added back. Your exact amount is on the quote before you approve anything.

What if my breaker panel is full – does that blow up the price?

A full panel doesn’t stop the job, but it does change it. Most homes here can take a 50 amp circuit on existing capacity, which is why the typical install lands between $900 and $1,700. If there’s no room, you’re looking at added electrical work to free up space or upgrade the service, quoted as its own line instead of folded in. That’s the single biggest reason a job climbs toward the $2,500 end. The technician checks your panel first, before you commit to anything.

I’m in Forney, not Sunnyvale – is there a trip charge for coming out that far?

No extra trip charge. Forney, Rockwall, Rowlett, Mesquite, Garland, Balch Springs and Seagoville all pay the same $26 to $99 service call as an address in Sunnyvale itself. We cover Dallas County and Kaufman County, and technicians run same-day calls six days a week. Someone answers the phone at 972-288-2263 around the clock, so you can book at 11 p.m. and take a slot the next working day. In Forney your permit runs through Kaufman County rather than the Town of Sunnyvale.

Do I have to pay for the whole install up front?

Financing is available if you’d rather spread the cost, and you can apply before we schedule so approval isn’t holding up your install date. We don’t quote rates or terms here; the real numbers come from the lender, not from us. Otherwise the only money that moves before the work is the $26 to $99 service call, and that comes off the final invoice once you approve the job. Ask about the application when you call 972-288-2263 and we’ll send it over.

Ready to Get Started?

Call 972-288-2263 Today, Get Service Today.