Heating Contractor in Irving: Heating Repair, Replacement & Installation

Your furnace clicks, hums, and then nothing. Or it heats one room and leaves the rest cold. Picking the right heating service starts with naming the actual problem. Xtreme Air Services – Irving covers every stage of it, from a furnace that won’t light to planning a full system replacement. If you need a heating contractor in Irving, this page is a good place to start.

In Irving, homes range from older houses near Plymouth Park and Cottonwood Heights built decades ago to newer construction near Las Colinas. Furnace age and system type can change from block to block. This page walks through our heating services, from emergency repairs to new installs and seasonal maintenance. Find the one that matches your situation.

Xtreme Air Services is a family-owned and operated HVAC, plumbing, and electrical contractor serving homeowners across Dallas, Fort Worth, Plano, Frisco, Allen, Irving, Carrollton, and the greater DFW Metroplex. Our licensed, background-checked technicians answer the phone around the clock and get to you the same day, with upfront pricing and no surprises.

Call Xtreme Air Services to talk through your heating issue and set up a visit.

Emergency / No-Heat Furnace Repair Gets Help Fast When Heat Stops

It’s 2 a.m. The first real freeze of the year just rolled in, and your vents are blowing cold air. That’s the moment emergency / no-heat furnace repair is built for.

DFW winters don’t bring steady cold. They bring short, sharp cold snaps. Your furnace can sit unused for months and then get asked to run hard all night. Parts that dried out, collected dust, or wore down over the off-season tend to fail right then.

When you call, a technician comes out the same day and diagnoses the no-heat problem in your home. Sometimes it’s a clogged filter or a tripped switch. Sometimes it’s a failed part that needs replacing. Either way, you’ll hear what’s wrong and see upfront pricing before any work starts.

Before you pick up the phone, check two things. Make sure the thermostat is set to heat, and make sure the furnace switch is turned on. Those are easy fixes you can handle yourself.

The hardest part for most people is deciding whether the problem is worth a call. If both of those checks look fine and the house keeps getting colder, it’s worth the call. You can read more about Emergency Furnace Repair in Irving.

Heating System Repair Covers Furnaces, Heat Pumps, and More

Not sure what’s wrong, just that your heat isn’t right? Heating system repair is where most calls start.

Heating system repair is the broad repair service. It covers furnaces, heat pumps, and the parts that tie them together, like the thermostat, blower, and ductwork. Gas furnace repair, electric furnace repair, and heat pump repair each focus on one type of equipment. Heating system repair is for when you don’t know yet which piece is failing.

A technician looks at the whole system, not just the part you suspect. These are common signs that point to heating system repair:

• Some rooms stay cold while others warm up fine
• The system runs, but the air feels lukewarm
• Banging, squealing, or rattling when the heat kicks on
• The furnace or heat pump turns on and off over and over
• The thermostat says one thing and the house feels another

Once the technician finds the failing part, you’ll get a plain explanation of the fix before any work begins. No guessing, no surprise add-ons. You stay in charge of the decision. Learn more about Heating System Repair in Irving.

Furnace Replacement Swaps Out an Aging or Failing Unit

Many homes in Irving’s older neighborhoods, like those around Plymouth Park, still run furnaces that went in decades ago. A furnace that old is more likely to be near the end of its service life, even if it still turns on every winter.

Furnace replacement swaps out that existing unit for a new one. It’s different from furnace installation, which covers adding a furnace where there wasn’t one or switching to a new type of system.

A technician removes the old furnace, figures out the right size for your home, and installs the new one. In many homes, the job is done in a single day. Sizing matters more than people think. A furnace that’s too big runs in short bursts and wears itself out. One that’s too small runs nonstop and still leaves rooms cool.

We’ll be straight with you: not every old furnace needs replacing. If a repair makes more sense, we’ll tell you. But if your furnace breaks down every winter and parts keep failing, furnace replacement may be the smarter move. See more about Furnace Replacement in Irving.

If your furnace needs more than a repair, give us a call and we’ll walk you through furnace replacement in Irving.

Furnace Installation Adds a New System to Your Home

Furnace replacement takes out an old unit. Furnace installation starts where there’s nothing to take out.

This service fits when you’re building a room addition, finishing a garage, or changing your heating setup entirely. Maybe you’re moving away from an old system type. Maybe a new space has no heat source at all.

A technician starts by sizing the furnace to the space it’ll heat. Then comes the part people don’t always expect: ductwork. A new furnace needs a path to move warm air into each room. If those ducts don’t exist, we run them. If existing ducts need to connect to the new system, we handle that too.

From there, the technician sets up the furnace, connects it to the thermostat, and runs it to confirm every room gets heat. You’ll know what’s going in and why before any work starts.

Additions and garage conversions are common in Irving’s older homes. Putting a new space on the right heat source from day one beats chasing a cold room later. Read more about Furnace Installation in Irving.

Heat Pump Installation Offers a Year-Round Heating and Cooling Option

A lot of people think of a heat pump as an air conditioner. It is one, but it also heats. A heat pump moves heat out of your home in summer and pulls heat in during winter. One system handles both jobs.

Heat pump installation is a whole-home system choice. It makes the most sense during an upgrade, when you’re already replacing an aging AC, furnace, or both. Ductless heating installation is a different service. It fits homes or additions that don’t have ductwork at all.

Before anything goes in, a technician looks at your home’s layout, square footage, and ductwork. The goal is a heat pump sized for both Texas summers and winter cold snaps. A unit that’s sized right keeps you comfortable in July and January without straining.

Efficiency ratings can get confusing. SEER2 measures cooling efficiency, and HSPF2 measures heating efficiency. Higher numbers mean the system uses less energy to do the same work. We’ll explain what those numbers mean for your home in plain terms. Find out more about Heat Pump Installation in Irving.

Thinking about Heating Contractor? Let’s talk.

(469) 200-2166

Call Today, Get Service Today. Xtreme Air Services — Irving is ready to help.

Heating System Installation Plans the Right Setup for Your Home

Before you pick equipment, you need a plan. Heating system installation is that planning step.

This service is for homeowners facing new construction or a major remodel who aren’t sure yet whether a furnace, a heat pump, or a zoned setup fits best. Furnace installation and heat pump installation cover the specific equipment. Heating system installation is about choosing that equipment in the first place.

A technician walks through your options with you. They’ll look at square footage, how your rooms are laid out, and what ductwork you already have. A two-story house with a big open living room has different needs than a single-story ranch. Heating zoning installation can come into play here too. It lets you control the temperature in different parts of your home separately.

This is the step people tend to rush, and it’s the one we’d slow down on. A good plan keeps you from living with a system that never quite fits your home.

You’ll get a clear recommendation and the reasons behind it. Then you decide. Learn more about Heating System Installation in Irving.

Heating System Maintenance Keeps Equipment Running Reliably

Heating system maintenance is ongoing care for your furnace or heat pump. It’s a plan, not a one-time visit.

That’s what sets it apart from a heating maintenance / tune-up. A tune-up is one seasonal appointment. Heating system maintenance is the bigger umbrella that tune-ups fit under.

With a recurring care plan, a technician keeps tabs on your system over time. That includes regular inspections, furnace filter replacement, and performance checks across the whole system. If your home has both a furnace and a heat pump, both get looked after.

The real value is in the pattern. When the same system gets checked on a schedule, small changes show up early. A blower that’s starting to strain or a part that’s wearing faster than it should gets noticed before it quits on a cold night.

It also takes the remembering off your plate. You don’t have to track when the filter was last changed or when the system was last inspected. We keep up with it so you don’t have to.

See how it works on our Heating System Maintenance in Irving page.

Heating Maintenance / Tune-Up Prepares Your System Before Winter

Your furnace might sit idle from April to November, then run hard for a week straight when a cold front blows through. Irving’s heating season is short and intense like that.

That’s why a heating maintenance / tune-up before winter pays off. A furnace that sat all summer can reveal problems the moment it’s switched on. It’s better to find them during a tune-up than on the first freezing night.

This is one seasonal visit, not an ongoing plan like heating system maintenance. During a tune-up, a technician will typically:

• Clean key parts, including the flame sensor and burners
• Check belts, motors, and electrical connections for wear
• Test the ignition and safety controls
• Look at the filter and airflow
• Confirm the system heats evenly and shuts off the way it should

Fall is the best time to book, before the first cold snap. If you wait until you need heat, you’ll be scheduling during the busiest stretch of the year. Read more about Heating Maintenance and Tune-Up in Irving.

Ready when you are – get in touch today.

(469) 200-2166

Call Today, Get Service Today. Xtreme Air Services — Irving is ready to help.

Gas Furnace Repair Addresses Ignition, Venting, and Gas Issues

A gas furnace tells you a lot by how it fails. Gas furnaces are common across Irving’s older housing stock, so gas-specific repair know-how matters here.

Gas furnace repair targets gas-specific parts like the ignitor, gas valve, burners, and venting. That’s separate from electric furnace repair, which deals with heating elements and wiring.

Here’s a quick way to match what you’re seeing to the likely cause:

• Won’t light at all: often a failing ignitor
• Lights, then shuts off within seconds: often a dirty flame sensor
• No air moving through the vents: often a blower motor problem
• Acts erratic or ignores the thermostat: sometimes a control board issue

A technician checks the ignition system, gas supply, and venting to find the actual cause and fix it safely. Venting carries exhaust out of your home, so it’s always worth a close look on a gas furnace.

If you ever smell gas, leave the house and call your gas company first. Once it’s safe, we’ll come find the cause. Learn more about Gas Furnace Repair in Irving.

Heat Pump Repair Fixes Issues With Existing Heat Pump Systems

Heat pump repair fixes an existing heat pump that isn’t heating the way it should. Heat pump installation is about putting in a new system. This service is for the one you already have.

Common signs include air that feels cool with the heat on, a system that cycles on and off oddly, thick ice that stays on the outdoor unit, or a heat pump that runs nonstop without warming the house.

A technician checks the parts most likely behind those symptoms. Refrigerant levels come first, since low refrigerant cuts heating power. Next is the reversing valve, the part that switches your heat pump between cooling and heating. If it sticks, you can end up with cool air in January. Electrical parts like capacitors and contactors get tested too.

One thing worth knowing: a little frost on the outdoor unit in cold weather is normal. Heat pumps run a defrost cycle to clear it. Thick ice that hangs around is a different story.

You’ll get a straight answer on what’s wrong and upfront pricing before any repair starts. Find out more about Heat Pump Repair in Irving.

Call Xtreme Air Services today to get a licensed technician out to your home.