Heating Contractor in Plano: Furnace Repair & Installation

Your furnace quits on the coldest night of the year. Or it runs, but one bedroom never warms up. Either way, you need a Heating Contractor in Plano who’ll tell you what’s really wrong and fix it. That’s what we do at Xtreme Air Services – West Plano.

Here’s the idea behind this page. Most heating trouble doesn’t mean you need a new furnace. The right service depends on what kind of system you have and what’s going on with it. Since North Texas winters are short and hard to predict, catching problems early beats scrambling when a cold front hits.

Below, you’ll find each of our heating services, from emergency no-heat furnace repair to furnace safety inspection. Each one gets a quick, plain explanation so you can pick the right one. We work under HVAC License #TACLA29023C. Not sure which service fits? Call 469-217-9095 and talk to a real person today.

Emergency No-Heat Furnace Repair Gets You Warm Fast

It’s 6 a.m., the house is 58 degrees, and the furnace won’t make a sound. We treat that as an emergency. North Texas cold snaps tend to roll in fast and hard, and a dead furnace can’t wait until next week.

Emergency no-heat furnace repair is built for exactly this moment. You call, you talk to a real person, and we work to get a technician to your door the same day. There’s no extra charge for nights or weekends.

Plenty of no-heat calls trace back to a short list of causes:

• An ignitor that’s cracked or won’t glow
• A dirty flame sensor that shuts the burners off a few seconds after they light
• A clogged filter that makes the furnace overheat and shut itself down
• A tripped breaker or a thermostat with dead batteries

Check that last one before you call. If it’s the batteries, you just saved yourself a visit.

If it’s something bigger, your technician explains the fix in plain English and gets your okay before any work starts. Many of these problems can be handled on the first visit. Learn more about emergency no-heat furnace repair.

Heating System Repair Covers Every Furnace Problem

Is your furnace running, but something just feels off? Maybe one room stays cold. Maybe the blower sounds like it’s grinding, or the system kicks on and off every few minutes. That last one is called short cycling, and it wears parts out early.

Heating system repair is the umbrella for all of it. It’s where you start when you don’t know which part is failing. Your technician runs a diagnostic visit, finds the problem, and walks you through your options before touching anything.

A lot of the time, the trouble is one part. A worn blower motor, a failing ignitor, a dirty flame sensor, or a bad control board can each make a furnace act up. We fix those parts by name, and that’s often a much smaller job than people fear.

Once your technician knows what fuel your furnace burns, the job may narrow to gas furnace repair or electric furnace repair. You don’t need to know that ahead of time. We’ll figure it out with you.

The goal is simple: done right the first time, so you’re not calling back next week. See how heating system repair works.

Furnace Installation Brings Heat to New Spaces

Furnace installation means putting a furnace where there wasn’t one before. That might be a new build, a room addition, a converted garage, or a home that never had central heat.

This is different from furnace replacement, where an old unit already sits in place. With furnace installation, there’s nothing to swap out. Your technician starts from scratch.

The first step is sizing. A furnace that’s too big turns on and off in short bursts and heats unevenly. One that’s too small runs all day and still can’t keep up. So your technician looks at the square footage, the insulation, and how the space is laid out before picking a unit.

Then comes the hookup. That can mean new duct connections, venting to carry exhaust outside, a gas or electrical connection, and a thermostat that controls it all.

I’ll be honest, sizing is the step most people want to rush, and it’s the one that matters most. Get it right, and your furnace runs quietly for years. Read about furnace installation.

Furnace Replacement Swaps Out an Aging Unit

Furnace installation adds heat where none existed. Furnace replacement is for homes that already have a furnace that’s worn out. The old unit comes out, and a new one goes in.

Plano has both kinds of homes. Older, established neighborhoods often still run furnaces that have been heating them for a long time. Newer builds tend to have systems that are only a few years old. So the right answer depends a lot on when your house was built and what’s sitting in your attic or closet.

How do you know it’s time? A furnace that needs repairs every winter, gets louder each year, or can’t keep the house warm is telling you something.

Your technician removes the old furnace, hauls it away, and installs a new one matched to your existing ductwork. If the ducts need work to fit the new unit, you’ll hear about it before anything starts.

We won’t push furnace replacement if a repair makes more sense. That’s part of doing right by our customers. Get more detail on furnace replacement.

Stuck between installing and replacing a furnace? Call 469-217-9095 and a local technician will help you sort out which one you need.

Gas Furnace Repair Handles the Most Common System Type

Gas furnaces still heat a big share of Plano homes. They’re common in houses built before heat pumps caught on in the area.

Gas furnace repair covers the parts only gas systems have. Your technician checks the gas line and valve, the burners, the ignitor, and the venting that carries exhaust out of your home. Those checks keep your furnace running safely, not just running.

This is where gas furnace repair differs from electric furnace repair. An electric furnace heats with metal coils, kind of like a big toaster. No gas, no flame, no exhaust. A gas furnace burns fuel, so the repair has to cover combustion and venting too. Different parts, different checks.

Signs your gas furnace needs a look include burners that light and then go out, a flame that looks yellow instead of blue, or a faint gas smell near the unit.

If you ever smell strong gas, get everyone out of the house first and call your gas company from outside. Then call us.

Find out more about gas furnace repair.

Thinking about Heating Contractor? Let’s talk.

(469) 217-9095

Call Today, Get Service Today. Xtreme Air Services — West Plano is ready to help.

Heating System Maintenance Keeps Equipment Reliable All Season

Think of heating system maintenance as the habit, not the appointment. It’s the ongoing care that keeps your equipment healthy year after year. A tune-up is one visit. Maintenance is the routine those visits belong to.

With regular checkups, your technician gets to know your system. They can spot a part that’s slowly wearing out and flag it before it fails. That’s a lot easier than finding out on a freezing night.

Heating system maintenance also covers the small stuff people forget. Furnace filter replacement is a big one. A clogged filter makes your furnace work harder, and it can make the system shut itself down. Keeping a fresh filter in place is one of the easiest ways to protect your equipment.

Since we handle heating and cooling under one roof, it’s simple to keep both systems on the same schedule. One company, one phone number, one team that knows your home.

If you want fewer surprises and a furnace that lasts, heating system maintenance is how you get there. Learn about heating system maintenance.

Heating Maintenance / Tune-Up Prepares Your Furnace for Winter

Heating system maintenance is the long game. A heating maintenance / tune-up is one scheduled visit before cold weather arrives.

Here’s why it matters in North Texas. Our winters are short. Your furnace may sit idle for months, then get pushed hard when a cold front drops temperatures overnight. Dust settles on the burners, parts sit unused, and small problems hide. A tune-up in early fall catches them while it’s still mild outside.

A typical heating tune-up covers:

• Cleaning the burners and the flame sensor
• Testing the ignitor, safety switches, and thermostat
• Checking the blower and airflow
• Checking the filter and swapping it if it’s dirty
• Adjusting settings so the furnace heats evenly

In my view, early fall is the sweet spot. You get your pick of appointment times, and you’re not waiting in line during the first cold snap.

One visit. A furnace that’s ready. Book your heating maintenance / tune-up.

Heat Pump Installation Fits North Texas Winters

Did you know a heat pump heats your home too? A lot of folks think it’s just an air conditioner.

A heat pump moves heat instead of making it. In summer, it pulls heat out of your house. In winter, it runs in reverse and pulls heat from the outside air into your home. Even on a chilly day, there’s heat out there to grab.

That’s why heat pump installation fits North Texas so well. Our winters are mostly mild, and heat pumps are showing up in more newer Plano homes. One system handles both heating and cooling.

Heat pump installation is different from furnace installation. A furnace only heats. A heat pump does both jobs. Some homes pair a heat pump with a furnace as backup for the coldest nights, and your technician can talk through which setup fits your home.

Your technician sizes the system, sets the indoor and outdoor units, and connects everything to your ducts and thermostat. You’ll hear about a rating called HSPF2. It simply tells you how much heat you get for the power you use.

See more on heat pump installation.

Ready when you are – get in touch today.

(469) 217-9095

Call Today, Get Service Today. Xtreme Air Services — West Plano is ready to help.

Heat Pump Repair Fixes Issues Before the Next Cold Snap

Your heat pump is running, but the air from the vents feels lukewarm. Maybe the outdoor unit is crusted with ice. Maybe it won’t turn on at all.

Heat pump repair is for homes that already have a heat pump that isn’t keeping up. It’s a different job from heat pump installation. Nothing new goes in unless it has to.

Your technician checks three main areas. Refrigerant is the fluid that carries heat, and a low level usually points to a leak. The defrost cycle is how the outdoor unit melts ice off itself in cold weather. When it fails, ice builds up and your heat drops. Electrical parts like capacitors and contactors help the motors start and stop, and they wear out over time.

A little frost on the outdoor coil on a cold morning is normal. A thick block of ice that won’t go away isn’t.

It’s smart to get heat pump repair done before the next cold snap, while you’re not in a rush. Get details on heat pump repair.

Furnace Safety Inspection Checks for Hidden Hazards

A furnace can run fine and still not be safe.

A furnace safety inspection looks past comfort and checks for hazards. The big one is a cracked heat exchanger. That’s the metal wall that keeps flames and exhaust apart from the air you breathe. If it cracks, carbon monoxide can get into your home, and you can’t see it or smell it.

This matters most in Plano’s older neighborhoods, where many homes still run aging gas furnaces. Metal gets tired after years of heating up and cooling down.

How is it different from the other checks? A heating system inspection looks at how well your whole system runs. Carbon monoxide testing is one specific test for CO. A furnace safety inspection asks whether your furnace is safe to run, and it often includes carbon monoxide testing along with checks for gas leaks.

It’s worth booking a furnace safety inspection if:

• Your furnace is getting older
• Your CO alarm has gone off before
• You’re buying a home with an older furnace
• You see soot or scorch marks near the unit

If your CO alarm is sounding right now, get everyone outside and call 911 first. Read more about furnace safety inspection.

Ready to get your heat sorted out? Call Xtreme Air Services at 469-217-9095, talk to a real person, and get a technician to your Plano home the same day.