HVAC Contractor in Irving

Your AC quits on a hot July afternoon. Or your energy bill keeps climbing and you can’t tell why. Either way, you need an HVAC Contractor in Irving who can tell you what’s wrong and which service fixes it. That’s what we do at Xtreme Air Services – Irving. We help Irving homeowners match the right HVAC service to the right problem, from urgent repairs to planned upgrades.

Irving homes aren’t all the same. Older single-family houses often have aging ductwork that’s been working hard for decades. Newer condos near Las Colinas tend to need more flexible comfort setups. We work on both.

We’re a family-owned and operated HVAC, plumbing, and electrical contractor serving Irving and the greater DFW Metroplex, with 17 years in business since 2009 and a 4.8-star reputation across 2,900+ reviews on Google, Angi, and HomeAdvisor. Each section below explains what a service covers and when to call. Each one also links to a page that goes deeper.

Not sure where to start? Call Xtreme Air Services today to discuss your HVAC needs in Irving.

Emergency HVAC Service Responds When Your System Fails

In Irving, summer heat doesn’t let up for long. Stretches of 95°F-plus days are normal here. A dead AC in that kind of heat isn’t just uncomfortable. It can become a safety issue, especially for babies, older family members, and pets.

That’s what Emergency HVAC service is for. It’s the call you make when your system stops working and can’t wait for a regular appointment. Our licensed, background-checked technicians answer the phone around the clock and get to you the same day.

Here’s how it goes. You call and reach a real person, not a phone tree. We ask what’s happening and get a technician headed your way. Once we’re at your home, we diagnose the problem and explain what we found before any work starts.

Emergency HVAC service isn’t only for summer. A heater that quits during a sudden North Texas cold snap gets the same quick response. So does a system that keeps tripping the breaker or won’t shut off.

If you’re asking yourself whether it’s an emergency, it’s worth a call. We’d rather talk it through with you than have you sweat it out overnight.

See what to expect on our Emergency HVAC Service in Irving page.

HVAC System Repair Fixes What’s Already Broken

Is your system making a grinding noise, blowing warm air, or not turning on at all? Then you need HVAC system repair.

HVAC system repair fixes a system that has already broken down. That’s the difference from maintenance, which is scheduled work done before something fails. If you’re looking for someone to repair HVAC equipment that’s acting up right now, this is the service.

Here are common signs it’s time to call:

• Warm air coming from the vents while the AC is on
• Weak airflow in some rooms, or all of them
• Banging, squealing, or grinding sounds
• The system turns on and off every few minutes
• It won’t start at all

A technician finds the part that failed and tells you about it in plain terms. No jargon dump. You’ll know what broke, why it matters, and what fixing it involves before we start. Then we repair it so your system runs again, done right the first time.

Many repairs come down to one worn or failed part. That’s good news. It often means you can get comfortable again without replacing the whole system.

Get the details on our HVAC System Repair in Irving page.

HVAC System Maintenance Keeps Equipment Running Longer

HVAC system maintenance is the ongoing care that keeps your heating and cooling working well year after year. Think of it as the big picture. It’s not one visit or one signed agreement. It’s the habit of looking after your equipment before it gives you trouble.

That’s different from a single seasonal tune-up or a preventative maintenance plan. Those are specific ways to get maintenance done. HVAC system maintenance is the whole category they fall under.

In Irving, your system works hard. The AC can run for months with barely a break, and attic units sit in brutal heat all summer. That wear adds up. Regular HVAC system maintenance looks across the whole system, from the outdoor unit to the indoor coil to the electrical connections. It catches small problems early. A loose wire or a dirty coil is a quick fix today. Left alone, it can turn into a bigger repair down the road.

This is the step many homeowners skip, mostly because nothing seems wrong yet. That’s exactly the right time to do it.

Good HVAC system maintenance can help your equipment last longer, run more efficiently, and keep your home comfortable more of the year.

Learn more on our HVAC System Maintenance in Irving page.

HVAC Maintenance and Tune-Up Service Prepares Your System for the Season

It’s late April, and the first real heat of the year is about a week out. That’s the perfect moment for an HVAC maintenance and tune-up visit.

An HVAC maintenance and tune-up is one scheduled appointment that gets your system ready for heavy use. General maintenance is the ongoing category, and a preventative plan bundles tune-ups into a recurring schedule. The tune-up is the part you book.

During the visit, a technician checks the parts that work hardest in Irving’s climate:

• Air filter condition, with a swap if it’s clogged
• Indoor and outdoor coils, cleaned so heat moves the way it should
• Refrigerant levels, so the AC can cool properly
• Electrical connections and controls
• The drain line, so condensation flows out instead of backing up

In the fall, the same idea applies to heating before the first cold snap. You want problems found on a mild day, not on the first 100-degree afternoon or the first freezing night.

You’ll get a plain rundown of what we checked and anything that needs attention.

Need a seasonal check-up? Visit our HVAC Tune-Up Service in Irving page HVAC maintenance / tune-up to schedule your visit.

Preventative Maintenance Plans Cover Your System All Year

A tune-up is one appointment. A preventative maintenance plan is a recurring agreement that covers several visits a year.

That difference matters more than people expect. Most folks mean to book a spring tune-up and a fall tune-up. Then life gets busy, and suddenly it’s August and nobody remembered.

A preventative maintenance plan takes that off your plate. Your visits are set on a schedule, so your system gets checked each season without extra calls from you. Cooling gets looked at before summer. Heating gets looked at before winter.

It’s a good fit if your equipment has been around a while, or if you just don’t want to track dates yourself. It also works for landlords who want each rental unit checked on time. And when your system gets seen every season, it’s easier to notice when something starts to change.

A plan doesn’t replace repair. If something breaks between visits, that’s an HVAC system repair call. Regular checks can still help you avoid some of those calls in the first place.

See how it works on our Preventative Maintenance Plans in Irving page.

Have questions? We’re happy to help.

(469) 200-2166

Call Today, Get Service Today. Xtreme Air Services — Irving is ready to help.

Thermostat Installation Replaces Outdated Controls

Maybe the screen on your old thermostat has gone blank. Maybe it’s the dial type that’s been on your hallway wall since the house was built, and it never seems to hold the temperature you set.

Thermostat installation replaces that unit with a new one. It’s a full swap. That’s different from thermostat repair, which fixes wiring or calibration problems on the thermostat you already have. If your current unit is worn out, outdated, or no longer works well with your system, installation is usually the better call.

Here’s what a technician does. We turn off power to the system and remove the old thermostat. Then we check the wiring behind it to make sure it matches the new unit. We wire in the new thermostat and mount it. Last, we run your heating and cooling to confirm the thermostat talks to your system the way it should.

It sounds like a small job, and it is. But a thermostat that’s wired wrong can make your system run too long, cycle too often, or not turn on at all. That’s why it’s worth having someone check the setup in your Irving home.

Find out more on our Thermostat Installation in Irving page. If your current unit just needs a fix, ask about our thermostat repair service Thermostat repair instead.

Smart Thermostat Installation Adds Wi-Fi Control to Your Home

Want to cool down the house from your phone before you leave work? That’s what smart thermostat installation gives you.

Smart thermostat installation covers Wi-Fi connected thermostats you control through an app. Standard thermostat installation covers any replacement unit. The smart version adds network setup and app setup on top of the install.

A technician mounts and wires the smart thermostat, then connects it to your home Wi-Fi. We set up the app on your phone with you, so you’re not stuck figuring it out alone later. You can set schedules, change the temperature from anywhere, and see how your system runs.

This is handy in Irving, where summer afternoons are long and hot. You don’t have to cool an empty house all day. You can set it to start cooling an hour before you get home instead.

One honest note. Many smart thermostats need a steady power wire, often called a C-wire, to run reliably. Some older homes don’t have one in place. We check for it before installing, so you don’t end up with a thermostat that keeps dropping offline.

Get started on our Smart Thermostat Installation in Irving page.

Ductless Mini-Split Installation Fits Spaces Without Ductwork

Garage conversions and room additions are common across Irving’s older neighborhoods. The trouble is, these spaces often don’t have ductwork for central air. Running new ducts from the main system isn’t always practical, and a window unit only goes so far.

Ductless mini-split installation solves that. A mini-split has two main parts: an outdoor unit and an indoor unit mounted high on the wall of the room. A small line set connects them through a hole in the wall. No ducts needed.

Our technicians mount the indoor and outdoor units, run the connections, and start up the system. The space gets its own temperature control, separate from the rest of the house. Your converted garage office can stay cool without overcooling the bedrooms.

Ductless mini-split installation places new equipment. If you already have a mini-split that isn’t cooling or heating like it should, that’s ductless mini-split repair, a different service Ductless mini-split repair.

Before we install, we look at the room’s size, how much sun it gets, and where the units can go. Getting the placement right is the part that matters most.

Read more on our Ductless Mini-Split Installation in Irving page.

Thinking about HVAC Contractor? Let’s talk.

(469) 200-2166

Call Today, Get Service Today. Xtreme Air Services — Irving is ready to help.

Ductless Heating and AC Services Cover Year-Round Comfort

A lot of people think of ductless systems as air conditioners and nothing more. Most modern ductless units are heat pumps, though. They cool in summer and heat in winter.

Ductless heating and AC services cover both sides of that job. This is the broad service for keeping your ductless equipment working in every season. Mini-split installation and mini-split repair are the specific hardware jobs underneath it.

So what does that look like? Our technicians check how the system cools, then check how it heats. We clean the indoor unit’s filters and coil, look over the outdoor unit, and make sure the system switches between modes the way it should. If you’re still deciding whether ductless makes sense for your home, we can walk you through how it would handle Irving summers and the occasional hard freeze.

The heating side gets overlooked often. People run their mini-split all summer, then flip it to heat on the first cold night and find out something’s off. Checking both functions ahead of time saves you that surprise.

Learn more on our Ductless Heating and AC Services in Irving page.

Indoor Air Quality Solutions Address Allergens and Stale Air

If you dust on Saturday and there’s a fresh layer by Monday, your home’s air might be the issue. The same goes for stuffy rooms, sneezing that only happens indoors, or air that feels damp or too dry.

Indoor air quality solutions cover the broad range of fixes for those problems, including filtration, purification, and humidity control. UV air purifier installation is one specific product under that umbrella. It’s a good fit for some homes, but it isn’t the answer to every air problem.

Two things push this need in Irving. DFW allergen season can stretch through much of the year. Newer homes are also built tight to save energy, so stale air and moisture can hang around longer.

A technician looks at your home’s air and your system, then recommends what fits the root cause. Common options include:

• Better air filtration at the system
• UV air purifier installation
• Humidifier installation for dry winter air
• Dehumidifier installation for muggy, damp rooms

You don’t always need a whole new system to breathe easier. Often one well-chosen add-on does the job.

Explore your options on our Indoor Air Quality Solutions in Irving page.

Other HVAC Services We Handle

A full HVAC system check often covers more ground than a single visit, so we also offer HVAC system inspection to review your equipment from top to bottom. If your blower motor is failing, we handle blower motor replacement, and we install new air handlers through air handler installation. Routine air filter replacement keeps airflow steady between visits.

For rooms that run too hot or too cold compared to the rest of the house, zoning system installation and zoning system inspection let you control temperatures by area. Leaky ductwork wastes conditioned air, which is where duct sealing and HVAC duct & vent repair come in, alongside HVAC duct & vent installation for new construction or additions. Homeowners looking to cut energy bills long term can ask about high efficiency HVAC systems when it’s time to replace older equipment.